1. Product Features:
1.It is safe and environment-friendly product without solvent or pollutants. And it has approved tests by state related testing bodies so it is applicable directly to dinking waterproof works.
2.As mono-component product, it is easier to handle. And coating application is simple.
3.Compose of pure polyurethane, the coating film is featured with rubber's properties. High-elasticity, high-strength, high-extensibility and high adhesion.
4.It is applicable to heavy-film coating, and the film has high compatibility without pinholes or bubbles.
5.The film is generated by chemical reaction, featured with water-resistance, corrosion resistance, fungus resistance.
6.It is featured with good physical and mechanical properties ,high resilience, anti-fatigue, aging resistance. Its tensile strength reaches as high as 3Mpa with elongation at break 600%.
7.Good weather ability makes it adaptable to drastic changes of weather regardless of hot or cold.
8.Water-curing Mechanism make the scope of its application wider.
2. Specification
Type | Single component Polyurethane Waterproof Coating |
Material | Isocyanate and Polyether |
Thickness | 1.0mm-3.0mm |
Density | 1.8-2.0Kg/sqm while thickness is 1.5mm. |
Packing | 25kg/barrel |
Loading in Container | 11.25tons/450barrels/20'container |
Colors | Standard: Red or customized |
Application Method | Brus |
3. Scope of Application
1.Its applicable to waterproof and moisture works of roofing, external walls, basements, balconies ,kitchens and lavatories .
2.it is suitable for special buildings like granaries, civil air defense works, bridge projects.
3.It is specially suitable for waterproof construction for place where the shape is complex and pipeline bend place.
Ingredients and dosage:
according to the construction of dosage, stir well to use. Reference usage of: 1 mm thick coating amount is about 1.3 1.5 kg / sqm.
Large waterproof construction: the mixed paint scraper evenly coated with a rubber or plastic, required thickness, average of 1.5 mm to 2.0 mm, can be 3-4 times brushing, besmear after time should be after the previous coating curing film, and in vertical direction of the brushing, generally as separate film, underground floor should be spread a layer of tire body reinforced material.
Coating thickness: 1.2 2.0 mm in underground engineering, the general should be 1.5 mm, toilet bath room should not be less than 1.5 mm, exposed roof engineering using multichannel waterproof, each thickness not less than 1.2 mm, in III roofing waterproof level for a fortification, waterproof thickness not less than 2 mm, between the coating and overlay on tire body reinforced material, tire body below the coating thickness is not less than 1.0 mm, the coating is not less than 0.5 mm.
Act the role of surface: in the final again paint brush real before solidification in surface loose and clean sand:
Coating: coating the surface of the waterproof layer should be isolation protection according to design requirements.
Storage and transportation matters
To save the material in a dry indoor ventilation;
Fight or in the transport, avoid collisions, pay attention to the fire;
The shelf life of product shelf life for half a year, more than the re-inspection qualified rear can use.